Step-by-Step Guide to Reset a Hikvision Camera via the Reset Button
Step 1: Locate the Reset Button
- Identify the Reset Button:
- The reset button is typically located inside the camera housing. Depending on the model, you may need to remove the camera’s cover or dome to access it.
- For some models, the reset button might be a small pinhole button that requires a paperclip or similar tool to press.
Step 2: Prepare the Camera
- Power Off the Camera:
- Disconnect the power supply to the camera. If the camera is powered via PoE (Power over Ethernet), disconnect the network cable.
Step 3: Perform the Reset
- Press and Hold the Reset Button:
- Press and hold the reset button using a suitable tool (such as a paperclip for pinhole buttons).
- While holding the reset button, reconnect the power supply or network cable to the camera.
- Hold the Button for 10-15 Seconds:
- Continue to hold the reset button for approximately 10-15 seconds. You may observe the camera’s indicator lights flashing during this time.
- Release the Button:
- After 10-15 seconds, release the reset button.
Step 4: Wait for the Camera to Reboot
- Camera Reboot:
- Allow the camera a few minutes to reboot. The camera will reset to its factory default settings during this process.