Dahua DHI-ITC413-PW4D-IZ3 AI access ANPR 4MP – 8-32mm max 100km/h
Dahua AI access ANPR 4 Megapixel Full HD WDR ANPR Camera, IR, max 120km/hr, 8 mm–32 mm Motorised lens
High-performance CMOS image sensor and processor that supports continuously extracting metadata 24/7
> Adopts intelligent deep learning algorithms and supports recognition of unlicensed vehicles and the type, brand and color of vehicles
> Built-in signal port, data port, communication port and remote controllers assist in controlling external devices such as entry and exit barriers
> Built-in LED for simplified installation and commissioning
> All-in-one structure with junction box and bracket, and it is also low power consumption
> IP67 and IK10 rated
> Supports intrusion and loitering detection and triggers light and voice alarms when perimeter events occur to actively deter targets. Custom audios can also be imported and edited
> Easily adapts to scenarios through its motorized vari-focal lens.
Environment Check: Ensure the installation environment is suitable for ANPR:
Lighting Conditions: Sufficient lighting at the scene; avoid direct sunlight or strong backlight.
License Plate Characteristics: Consider font, size, and reflectivity.
Camera Angle: Maintain proper angles for accurate plate capture.
Required Tools: Screwdrivers, drills, network cables, mounting brackets, and power supplies.
2. Camera Positioning
Height: Install the camera between 2.5m to 6m off the ground.
Distance: The optimal range for capturing plates is 3-25 meters, depending on the model and lens.
Angle:
Horizontal tilt: <30°
Vertical tilt: <15°
Plate View: Ensure the license plate is fully visible without obstruction.
3. Mounting Requirements
Mounting Surface: Secure and vibration-free surface (e.g., poles or walls).
Mounting Bracket: Use the compatible mounting bracket provided with the camera.
Waterproofing: Seal connections to protect against water ingress.
Stability: Tighten all screws to prevent movement during operation.
4. Power and Network
Power Supply:
Use a 12V DC or PoE (Power over Ethernet) power source.
Ensure the power supply meets the required wattage for the device.
Network Configuration:
Use Cat5e or higher network cables for data transmission.
Ensure a stable network connection for video and ANPR data transfer.
5. Configuration
Software Setup: Access the camera via the web interface for configuration:
Set the IP address to match your network.
Configure plate recognition parameters such as region, number plate format, and sensitivity.
Focus Adjustment: Ensure the camera is focused for clear plate capture.
Test Run: Verify the camera captures plates accurately and adjust settings if necessary.
These guidelines ensure optimal performance for Dahua Smart ANPR cameras during installation and configuration. For detailed steps and advanced features, refer to the full manual.
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back
Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)
X
FREE SHIPPING* On All Orders Australia Wide - *Just spend over $100 to activate! Holiday Trading hours - Closed from 23rd Dec to 3rd January
