Shop

The Aetek AET-TE10-110-RX is an EPoT (ethernet and power over UTP/STP cable (Cat5/Cat6) receiver equipped with 1 EPoT port and 1 LAN port and is also powered by a 65W power adapter. This cutting-edge model is a long range PoE solution providing data and power to a EPoT TX adapter and a PoE IP camera over single UTP/STP cable up to 1,200m.

The Aetek AET-SFP-SX-X5 is a multi-mode SFP transceiver.

The Aetek AET-SD-201 is part of the SD series surge protectors which are proven to keep PoE switches, PoE PDs, and other IP devices safe from lightning and other forms of electrical interference, including power surges and spikes over networking cables. It is classified as a hardened-grade surge protector and will operate in harsh weather conditions from -40 degrees to 85 degrees.

With a robust operating temperature range, the AET-SD-201 will prevent surges of up to 10KA and features plug-and-play installation. Further to that, it can be deployed on either a wall or pole mount and has the added protection of an IP66-rated metal enclosure for guaranteed operation in any environment.

Aetek’s AET-I39-210 PoE BT injector provides a full range of 95W PoE to power a variety of PDs and pass data over network cables remotely.

The E69-602 is IP67-rated & harden-graded Gigabit PoE Extender, operating temperature from -40°~65°C. It’s ideal for harsh outdoor environment where two units of E69-602 can be daisy-chain to prolong range of PoE devices such as PoE cameras, wireless APs reaching up to 500m from end to end. No power adapter required, E69-602 Gigabit PoE Extender is powered by UPoE Injector, Middle-Span Hub, or PoE switch over one networking cable extending Ethernet range depending on PD’s power consumption and PSE’s power budget per port.

The E69-602 is built-in voltage booster guarantees stable voltage output for your high powered PoE devices.

The AET-C62-05030B is a ceiling PoE switch with one PoE bt input port, five PoE outport ports and visible LED indicators for simplified in ceiling installation of POE and DC power devices. The AET-C62-05030B daisy-chain PoE feature extends long range PoE up to 300m over cat 5e/cat 6 cable without extra AC/DC power adapter in ceiling. Furthermore, the AET-C62-05030B provides DC 12V/24V output for DC powered devices.

AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.